Heating constant temperature bath for standard test method for corrosiveness to copper from petroleum products by copper strip test Working temperature range +20…+200 °С. Stainless steel bath tank 14 liters in volume and 230 mm in depth.
Advance heating constant temperature bath for standard test method for corrosiveness to copper from petroleum products by copper strip test according to ASTM D130 and ISO 2160. The Bath can be utilized for internal and external temperature applications. Temperature applications of smaller objects can be carried out directly in the internal bath of the circulator. An integrated cooling coil is provided for temperature applications at near ambient or just below. All wetted parts are made of 304 stainless steel. Features & Benefits Intuitive operation and bright indicators “Stable state” and “Alarm”. Three programmable set point temperatures and integrated programmer for 10 program steps. Pump made of 304 stainless steel ensures a long lifetime with any bath fluid in a wide temperature range. Built-in clock and stopwatch for timing during measurement. Built-in tap water cooling coil for near or below ambient temperature conditions. Switching on and off at a given time due to the built-in clock. Digitally high temperature cut-off, heater failure and dry-running protection guarantee absolute safety of operation even without supervision. Built-in USB and optional RS232/RS485 interfaces to control the device in open protocol.